Download  Print this page

Cmc Indicators; Cmc Features - Dell PowerEdge VRTX Owner's Manual

Enclosure.
Hide thumbs

Advertisement

CMC Indicators

Figure 22. CMC Indicators
1.
status/identification indicator (CMC 1)
3.
power indicator (CMC 2)
The CMC indicators on the back panel of the enclosure provide the following information:
Indicator
Description
Power indicator
Green
Off
Status indicator
Blue
Amber

CMC Features

The CMC provides the following multiple systems management functions:
Enclosure-level real-time automatic power and thermal management:
Monitors system power requirements and supports the optional Dynamic Power Supply Engagement (DPSE)
mode. The DPSE mode improves power efficiency by allowing the CMC to dynamically place power supplies in
standby mode, depending on the load and redundancy requirements.
Reports real-time power consumption, which includes logging high and low points with a time stamp.
Supports setting an optional enclosure Maximum Power Limit, which either alerts or takes actions, such as
throttling server modules and/or preventing the power up of new server modules to keep the enclosure under
the defined maximum power limit.
Monitors and automatically controls cooling fans based on actual ambient and internal temperature
measurements.
30
2.
power indicator (CMC 1)
4.
status/identification indicator (CMC 2)
The CMC is receiving power.
The CMC is not receiving power.
The CMC is active and operating normally.
The CMC is in fault condition.

Advertisement

Table of Contents

   Related Manuals for Dell PowerEdge VRTX

Comments to this Manuals

Symbols: 0
Latest comments: