Download  Print this page

Removing A 2.5 Inch Hard-drive Blank; Installing A 2.5 Inch Hard-drive Blank; Removing A 3.5 Inch Hard-drive Blank - Dell PowerEdge VRTX Owner's Manual

Enclosure.
Hide thumbs

Advertisement

NOTE: The following procedures apply to the hard drives in the enclosure. For server module-specific hard drives,
see the server module's Owner's Manual at dell.com/poweredgemanuals.

Removing A 2.5 Inch Hard-Drive Blank

CAUTION: To maintain proper system cooling, all empty hard-drive slots must have hard-drive blanks installed.
1.
If installed, remove the front bezel.
2.
Press the release button and slide the hard-drive blank out until it is free of the hard-drive slot.
Figure 31. Removing and Installing a 2.5 Inch Hard-Drive Blank
1.
hard-drive blank

Installing A 2.5 Inch Hard-Drive Blank

1.
If installed, remove the front bezel.
2.
Insert the hard-drive blank into the hard-drive slot until the release button clicks into place.
3.
If applicable, install the front bezel.

Removing A 3.5 Inch Hard-Drive Blank

CAUTION: To maintain proper system cooling, all empty hard-drive slots must have drive blanks installed.
1.
If installed, remove the front bezel.
2.
Grasp the front of the hard-drive blank, press the release button and slide the blank out until it is free of the hard-
drive slot.
50
2.
release button

Advertisement

Table of Contents

   Related Manuals for Dell PowerEdge VRTX

Comments to this Manuals

Symbols: 0
Latest comments: