Indicator, Button, or
Optical drive (optional)
Local KVM access can be remotely disabled on a per server module basis, using the server module iDRAC interface
(access is enabled by default).
One VGA connector — The KVM supports a video display resolution range from 640 × 480 at 60 Hz up to 1280 × 1024
× 65,000 colors (non-interlaced) at 75 Hz.
Two USB ports for keyboard and mouse.
The KVM provides access to the server modules. You can access one server module at a time using the LCD panel.
Hard-Drive Indicator Patterns
Figure 16. Hard-Drive Indicators
hard-drive activity indicator (green)
3.5 inch hard
Up to twelve 3.5 inch hot-
swappable hard drives.
A slide-out label panel which allows you to record
system information such as Service Tag, NIC, MAC
address, the system electrical rating, and
Worldwide Regulatory Agency marks.
One optional SATA DVD-ROM drive or DVD+/-RW
Vents for the temperature sensor.
NOTE: To ensure proper cooling, ensure that
the vents are not blocked.
Allows a monitor to be connected to the system.
Up to four PowerEdge M520 or M620 server
modules, or up to two M820 server modules
specifically configured for the enclosure.
hard-drive status indicator (green and amber)