Honda FR500 Owner's Manual page 34

9. V-belt Adjustment
1. Remove the cover.
2. Engage the clutch and measure
distance (A), it should be within
the limits shown. To adjust,
loosen five engine mounting bolts
and shift the engine forward to
tighten the belts.
Tighten the bolts securely.
3. Measure clearances (B) and (C) to
see if they fall within the following
specifications:
(B) 3-5 mm (0.12-0.20 in)
ENGINE MihNTING BOLTS
BELT STOPPERS
(C) 6-8
mm (0.24-0.32 in)
To adjust, loosen the belt stopper
tightening bolts and slide the stop-
pers as required.
4. Tighten the bolts securely and
reinstall the cover.
7'ou ,,
-0
STOPPER TIGHTENING BOLTS
NOTE: If the clearances can't be ob-
tained by adjustment, the belts are
worn beyond use and should be
replaced. Always replace both belts
as a set.
33