Honda FR500 Owner's Manual page 30

3. Clean sediment cup
Turn the fuel valve to the off position and remove the sediment cup and O-
ring.
Wash removed parts in solvent, dry them thoroughly and reinstall them
securely. Turn the fuel valve ON and check for leaks.
SEDIMENT CUP
(FR500 only)
4. Transmission oil change
NOTE: Change the oil when the engine is warm to assure rapid and com-
plete draining.
1. Remove the oil filler cap and drain bolt, and allow the oil to drain.
2. Reinstall the drain bolt and fill the transmission case up to the tip of the
filler cap/dipstick with recommended oil (See page 8).
3. Reinstall the filler cap.
OIL CAPACITY: 1.1 I (1.2 US qt)
OIL FILLER HOLE DRAIN BOLT
29