Top Control - Sanyo PLC-XU300A Owner's Manual

Part Names and Functions

Top Control

SELECT button
– Execute the selected item (p.21).
– Expand or compress the image in the Digital zoom
mode (p.36).
POINT
– Select an item or adjust the value in the On-Screen
Menu (p.21).
– Pan the image in the Digital zoom +/- mode (p.36).
– Adjust the volume level (Point
INPUT button
Select an input source (pp.27-28, 37-38).
ON/STAND–BY button
Turn the projector on or off (pp.18-20).
POWER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode
(p.51).
MENU button
Open or close the On-Screen Menu (p.21).
10
(VOLUME +/–) buttons
buttons) (p.24).
AUTO SETUP button
Execute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions)
in the setting menu. (pp.23, 45).
WARNING indicator
– Lights red when the projector detects an abnormal
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.59, 70).
LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.62, 70).