Power Control And Status Check - Sanyo PLC-XU300A Owner's Manual

Chapter 4 Controlling the Projector
By clicking ON or Standby button on the page, the power of the projector can be con-
trolled.
Item
PJ status
Power .........................Displays the status of the lamp. (ON, OFF, On starting up, On cooling down)
Status ..........................Displays the status of the projector's power. (Refer to next page.)
Power control ........Controls the projector power by clicking the "ON" or "Standby" button.
The projector cannot be turned on while the projector is on cooling down.
The web browser checks and updates the projector's condition every 30 seconds automatically.
32

Power control and status check

Click Power & Status on the main menu. The control page will be dis-
played.
Description
Confirmation window
as shown in the below
appears when the
Standby
button is pressed.
Popup confirmation window