Login The Setting Page Of The Projector; Enter The Ip Address; Login - Sanyo PLC-XU300A Owner's Manual

Chapter 3 Basic Setting and Operation

Login the setting page of the projector

[1] Enter the IP address

Launch the web browser installed in your
computer, enter the IP address into the
"Address" on the browser and then press
"Enter" key.
Enter the address that you configured in
item "Network configuration" (

[2] Login

If the setting page has set the password, the authentication window will appear. In this
case type "user" onto the User Name text area and the login Network PIN code onto
the Password text area and then click OK (Log in) button.
* The entering User Name must be "user" and it can not be changed.
[Note]
When accessing the projector for the first time or the Network
PIN code "0000" is set, the auto-login will be performed and
the next main setting page is displayed.
18
p.12).