Input Source Selection (Computer 2: Rgb) - Sanyo PLC-XU300A Owner's Manual

Computer Input

Input Source Selection (Computer 2: RGB)

Direct Operation
Choose Computer 2(RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2 Use the Point
then press the SELECT button.
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.45).
28
COMPUTER 2 button
Computer 2(RGB)
buttons to select Input and
or the SELECT button.
buttons to select Computer 2 and
: RGB) RGB)
Top Control
INPUT button
Input Menu
Computer 1(RGB) /
(Component) / (Scart)
Computer 2(RGB)
Video
S-video