Telephoning; Making An External Call; Call Preparation; Ending A Call - Swisscom Classic A313 User Manual

Telephoning

Making an external call

Press , wait for the dialling tone and dial the number.

Call preparation

First, enter the number. If you enter an incorrect number, you can delete the entry.
Press to dial the number.

Ending a call

Press or replace the handset in the charging unit/base station.

Accepting a call

The caller's number or name (if already saved in the directory) is displayed only if your
network operator supports the Caller Identification Presentation* (CLIP) function.
Press to accept the call.
Send DTMF / keypad information
By switching to temporary DTMF you can press the softkey under OPTIONS, DTMF to
send control signals, e.g. for the Combox, during a call.
Note If you have activated "Autom. DTMF" in the
there is no need to switch to temporary DTMF. Temporary DTMF is automati-
cally deactivated when you end the call.
* Function dependent on network operator.
Contact your network operator to find out whether this service is supported.
SETTINGS
22
, TELEPHONY menu,