Telephoning; Making An External Call; Accepting A Call; Current Line Display During Call - Swisscom Nyon User Manual

Telephoning

Making an external call

Call preparation/Predial
First, enter the number. Press
If you enter an incorrect number, you can:
• delete it by pressing repeatedly the softkey under CLEAR: short press to
delete characters / long press to delete the entire number.
• move the cursor to the desired character by pressing the navigation
key (left/right).
Ending a call
Press or replace the handset in the charging station.

Accepting a call

The caller's number or name is displayed. The name is displayed if saved in
the contacts or if CNIP* - Calling Name Identification Presentation is avail-
able.
Press , to accept the call.

Current line display during call

In case the handset is attached to multiple lines, the current line name is
displayed during the call (below the handset status bar):
• When receiving an external call, the incoming line name is displayed.
• When making an external call, the outgoing line name is displayed.
• When toggling between two calls, the line name of the active call is
displayed.
This information is only displayed in case the handset is attached to more
than one line. If the handset is attached to one line only, the information
is not available.
*Functions dependent on network operator. Contact your network opera-
tor to find out whether this service is supported.
to dial the number.
15