Table of Contents
Advertisement
Network functions (supplementary services)
To activate some network functions, you need to send special codes to the network.
Often these codes contain special characters such as
the so-called flash signal is required. You can enter this by pressing
network operator to find out about the specific codes for individual network functions,
their functionality and, if applicable, the associated charges.
Procedure:
1. Press the softkey under MENU. Press
confirm.
2. Scroll to the relevant submenu and make the relevant settings:
Call forwarding
Call forwarding allows callers to reach you even if you are not near your own telephone.
Activate call forwarding and choose one of the three following options:
Unconditional
Incoming calls are forwarded immediately.
No reply
Incoming calls are forwarded after a delay (fixed time or number of rings).
or
to scroll to
NET FUNCTIONS
41
. In some cases,
. Contact your
and press OK to
Advertisement
Table of Contents
Need help?
Do you have a question about the Classic A313 and is the answer not in the manual?