External Enquiry Call; Brokering (Switching Between Two Calls) - Swisscom Classic A313 User Manual

Hide thumbs Also See for Classic A313:

Table of Contents

Telephoning

External enquiry call

Procedure:

1. You are conducting a call and want to call another external party without ending the

active external call.

2. Press the enquiry key

Note

An external enquiry call is managed by the public telephone network and is

therefore dependent on your network operator's available services (network

functions). Find out whether these network functions are supported.

You have two active calls (1 internal and 1 external), one of which is on hold. You can

switch between the two by brokering.

1. You are conducting two calls, one of which is on hold.

2. Press the softkey under BROKERING to switch between the call partners.

Note

Brokering between two external call partners is managed by the public

telephone network and is therefore dependent on your network operator's

available services (network functions). Find out whether these network

functions are supported.

to start the external enquiry.

Table of Contents

Do you have a question about the Classic A313 and is the answer not in the manual?

Classic a413