Conference Calls - Swisscom Classic A313 User Manual

Telephoning

Conference calls

You can set up a conference call by connecting another handset to the call.
If you are conducting a call:
INT
1. Press and dial the relevant handset. The external caller is put on hold.
2. If the second handset answers, you can talk to the internal call partner without the exter-
nal caller hearing you.
3. Press the softkey under BROKERING to talk to each call partner individually, or press
the softkey under JOIN to connect all three call partners with each other. To return to
brokering, press the softkey under END CONFERENCE. Each call partner can leave the
conference call by pressing
Note • You cannot use the
• If the second handset does not answer, you can end the ringing signal and
return to the original call by pressing the softkey under END.
INT
key if the call duration is not displayed.
29