Listening Over The Base Station; Answer Machine Settings; Answer Mode; Answer Delay And Time Saver Mode - Swisscom Classic A313 User Manual

Answer machine (Classic A413 only)

Listening over the base station

If the answer machine accepts a call, you can use
the caller while he is recording a message. To talk to the caller, press
set. The recording is automatically terminated. You can also adjust the loudspeaker volume
in standby mode.

Answer machine settings

Procedure:
1. Press the softkey under MENU. Press
menu and press OK to confirm.
2. Make the settings in the relevant submenu:

Answer mode

Select the outgoing message which callers will hear.

Answer delay and time saver mode

The answer delay function allows you to specify the delay, in seconds (0, 5, 10, 15, 20,
25 or 30), before the answer machine accepts the call.
Time saver mode helps you to save on costs for remote access: If your answer machine res-
ponds after a short time, this means there are new messages. If you continue to hear the
ring signal, you have no new messages. You can then replace the receiver to save costs.

Time limit

You can set the time allowed for incoming messages The longer incoming messages are,
the fewer can be recorded (max. recording capacity of your answer machine = 20 minutes).

Language

Set the preferred language for standard outgoing messages and remote access confirma-
tions.
to adjust the volume and listen to
to scroll to SETTINGS
53
on the hand-
in the ANSWER MACHINE