1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
At logic board ass'y replacement To initialize settings other than
initialization
(EEPROM
settings)
Destination
At logic board ass'y replacement To set the destination.
settings
(EEPROM
settings)
LCD language
At logic board ass'y replacement To set the language to be
settings
Waste ink
- At bottom case unit
counter
replacement
resetting
MP170: QM2-2800-000
MP450: QM2-2814-000
(EEPROM
settings)
- At ink absorber replacement
MP170: QY5-0149, QC1-
6014
MP450: QY5-0151, QC1-
6014
Document
- At document cover unit
pressure sheet
replacement
position
- At scanning unit replacement
adjustment
Print head
- At print head replacement
alignment
- At logic board ass'y
replacement
- At carriage unit replacement
Paper feed
At paper feed motor unit
motor position
replacement
*1
adjustment
Grease
- At carriage unit replacement
application
- At bottom case unit
replacement
- At platen replacement
- At eject roller replacement
- At cap blade unit replacement
-
*1: Red screws of paper feed motor
The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
Timing
the following:
- USB serial number
- Destination setting
- Waste ink counter
displayed on the LCD.
To reset the waste ink counter.
To adjust the pressure sheet to fit
in place to the four corners of the
platen glass when the cover is
closed
To ensure accurate dot placement. - Machine buttons
To adjust the belt tension.
(Position the paper feed motor so
that the belt is stretched tight.)
- To maintain sliding properties
of the carriage, cap blade unit,
and eject rollers.
Purpose
1-1
Approx.
Tool
time
None.
1 min.
None.
1 min.
None.
1 min.
None.
1 min.
None.
1 min.
2 min.
- Computer
(settings via the
MP driver)
None.
2 min.
- FLOIL KG-
1 min.
107A (QY9-
0057)
- MOLYKOTE
PG641 (CK-
0562)