Download  Print this page
   

Advertisement

PIXMA MP180 / MP460
SERVICE REFERENCE MANUAL
(Differences from the base models, PIXMA MP170 / MP450, only)
Part 1: MAINTENANCE
Part 3: APPENDIX
Attachment 1: PARTS LIST (for Asia)
First Edition: June 16, 2006
Second Edition: June 23, 2006
1. Maintenance
2. Error Display
3. Repair
2. Connector Location and Pin Layout
3. Specifications
QY8-13AX-010
Canon Inc.
(1/1)

Advertisement

Table of Contents

   Related Manuals for Canon PIXMA MP180

   Summary of Contents for Canon PIXMA MP180

  • Page 1 PIXMA MP180 / MP460 SERVICE REFERENCE MANUAL (Differences from the base models, PIXMA MP170 / MP450, only) Part 1: MAINTENANCE 1. Maintenance 2. Error Display 3. Repair Part 3: APPENDIX 2. Connector Location and Pin Layout 3. Specifications Attachment 1: PARTS LIST (for Asia)
  • Page 2 Black/Color document: Declared yield value in accordance with ISO/IEC FCD24711. Values obtained by continuous printing. Photo (4" x 6"): When printing Canon standard patterns on 4" x 6" Photo Paper Plus Glossy continuously with the default settings of Photo Paper Plus Glossy using Windows XP printer driver in borderless printing mode and Windows XP Photo Printing Wizard.
  • Page 3 2-1. Operator Call Errors Error [Error code] Solution (Replacement of listed parts, which are likely to be faulty) Main ink absorber full [5B00] Main ink absorber: Platen ink absorber full [5B10] - Bottom case unit MP180: QM3-1362 MP460: QM3-1364 - Ink absorber kit MP180: QY5-0149 MP460: QY5-0151 Platen ink absorber:...
  • Page 4 <Ink absorber counter resetting procedures> 1) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the ink absorber whose counter should be reset to 0%. Time(s) LED indication Ink absorber 0 times Green Main ink absorber (ON/OFF)
  • Page 5 USB(xxxxxx): USB serial number JPN: Destination <Print check items> On the service test print (sample below), confirm the following items: - Check 1, nozzle check pattern: Ink shall be ejected from all nozzles. - Check 2, top of form accuracy: The lines shall not extend off the paper.
  • Page 6 (2) EEPROM information print <How to read EEPROM information print> Print sample: MP460 JPN V1.00 ST=2006/05/30-16:41 LPT=2006/07/04-10:25 ER(ER0=1000 ER1=5100) P_ON(S=00001) MSD(000) IF(USB1=1) PC(M=000 R=000 T=011 D=000 C=000) D=008.0 Ps 000.0 TPAGE(TTL=00022 COPY=00005) CLT(2006/06/02-11:34) CT(BK_ST=002 BK_HC=002 CL_ST=000 CL_HC=000) IS(BK=0 M=0 C=0 Y=0) IC(BK=02150 M=02435 C=02001 Y=02081) A_REG=0 M_REG=1 CDIN(PB=000 OPB=000) BTIN=0...
  • Page 7 16: Half-automatic print head alignment on the machine 17: Manual print head alignment via the MP driver 18: Camera Direct print-supported device connection record (Canon PictBridge, other PictBridge) 19: Bluetooth-supported device connection record 20: Number of pages fed from ASF (total, plain paper, High Resolution Paper & Matte Photo Paper, Photo Paper Pro &...
  • Page 8 Part 3: APPENDIX 2. Connector Location and Pin Layout 2-1. Main Board CN201 (IrDA) (MP460 only) Signal name Function S-GN Ground IR RXD Receiving data signal IR TXD Sending data signal 4 to 8 +3.3V Power supply CN405 (Remote debugger) Signal name Function Sending data signal...
  • Page 9 2-6. Carriage Board (Print Head Connector) [Color print head] Signal name Function HENB2 Heat enable HCLK Print head clock B_HLAT Latch signal B_DATA_C C serial data B_DIA Diode sensor anode 6 to 11 Ground 12 to 15 --- Not used Print head ID 17 to 22 VH Print head drive 24V...
  • Page 10 Copy speed may vary depending on document complexity, copy mode, page coverage, type of paper used, etc. and does not take into account warming up time. When printing a 6 megapixel image taken by certain Canon digital camera from a memory card on default settings using Photo Paper Plus Glossy without border.

This manual is also suitable for:

Pixma mp460

Comments to this Manuals

Symbols: 0
Latest comments: