Canon PIXMA MP170 Service Manual page 25

(5) Waste ink counter setting
Before replacement of the logic board ass'y, check the waste ink amount, and re-set the waste ink amount value to
the replaced logic board. In addition, according to the waste ink amount, replace the waste ink absorber (the bottom
case unit or the ink absorbers). The standard amount for waste ink absorber replacement is given in the table below.
<Main waste ink absorber>
Waste ink amount
Less than 7%
7% or more
<Platen waste ink absorber>
Waste ink amount
Less than 7%
7% or more
*1: Check the waste ink amount by service test print or EEPROM information print.
[See 3-3. Adjustment / Settings, (7) Service mode, for details.]
(6) User mode
Function
Nozzle check pattern
printing
Print head cleaning
Print head deep cleaning
Automatic print head
alignment
Manual print head
alignment
Bottom case unit or ink absorber kit replacement
-Bottom case unit
MP170: QM2-2800
*1
MP450: QM2-2814
- Ink absorber kit
MP170: QY5-0149
MP450: QY5-0151
Not required.
Required.
Ink absorber (QC1-6014) replacement, and
Ink absorber kit replacement
*1
MP170: QY5-0149
MP450: QY5-0151
Not required.
Required.
Procedures
MP170, MP450:
On standalone machine, press the
Menu button to move to
Maintenance, and perform the
selection.
Cleaning both black and color:
MP170, MP450:
On standalone machine, press the
Menu button to move to
Maintenance, and perform the
selection.
Cleaning both black and color:
MP170, MP450:
On standalone machine, press the
Menu button to move to
Maintenance, and perform the
selection.
MP170, MP450:
On standalone machine, press the
Menu button to move to
Maintenance, and perform the
selection.
Perform from the MP driver
Maintenance.
Also available from the MP driver
Maintenance.
Also available from the MP driver
Maintenance.
Also available from the MP driver
Maintenance.
1-18
Remarks