Pnp/Pci Configurations - ECS KN1 Extreme Manual

Power On By Keyboard (Enabled)
Enable or disable the function of waking up the system by the keyboard activity.
KB Power ON Password (Enter)
Use this item to decide whether to enter the password when waking from keyboard.
Hot Key Power ON (Ctrl+F1)
Use this item to allocate the hot key to wake up the system.
PWRON After PWR-Fail (Off)
This item enables your computer to automatically restart or return to its last operating
status.
Resume By PCI PME [Enabled]
This item allows users to enable or disable PCI activity to wake up the system from
a power saving mode.
Resume By Ring [Disabled]
This item allows users to enable or disable LAN or modem activity to wake up the
system from a power saving mode.
Power-On by Alarm [Disabled]
This item allows users to enable or disable the alarm to wake up the system. If set
to Enabled, users can specify the specific day of month and the exact time to
power up the system.
AMD K8 Cool'n'Quiet control (Auto)
This item helps the system to lower the frequency when CPU idles. When the
frequency decreases, the temperature will drop automatically as well.
3-14
Hammer Fid control [StartUp]
This item allows users to set the CPU fid value manually, ranging from x4 to x21.
Press <Esc> to return to the main BIOS setting page.

3.3-6 PNP/PCI Configurations

These options configure how PnP (Plug and Play) and PCI expansion cards
operate in your system. Both the the ISA and PCI buses on the motherboard
use system IRQs (Interrup ReQuests) and DMAs (Direct Memory Access).
You must set up the IRQ and DMA assignments correctly through the
PnP/PCI Configurations Setup utility for the motherboard to work properly.
Selecting PnP/PCI Configurations on the main program screen displays this
menu: