Table of Contents
Advertisement
Quick Links
KT600-AA
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
i
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ECS KT600-AA
Summary of Contents for ECS KT600-AA
- Page 1 KT600-AA FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 2: Table Of Contents
Table of Contents Chapter 1: Introduction .............. 1 KT600-AA Features................1 Package List..................3 Layout ....................4 Components ..................5 Chapter 2: Hardware Installation ..........6 Central Processing Unit Installation (CPU) ........6 FAN Headers ..................6 Memory Module Installation............7 Connectors and Slots ............... -
Page 3: Chapter 1: Introduction
KT600-AA CHAPTER 1: INTRODUCTION KT600-AA F EATURES Supports Socket A. Supports single AMD Athlon XP/Duron/Sempron family processor. Front Side Bus at 100/133/166/200MHz. Chipset North Bridge: VIA KT600. South Bridge: VIA VT8237/VT8237R. Dimension ATX Form Factor: 19.1cm(W) x 29.3cm (L) Main Memory Supports up to 2 DDR devices. - Page 4 KT600-AA Serial ATA Supports 2 serial ATA (SATA) ports. Data transfer rates up to 150 MB/s. Complaints with SATA Version 1.0 specification. Onboard IDE Support 4 IDE disk drives. Supports PIO mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 function.
-
Page 5: Package List
KT600-AA Rear Side Connectors 4 USB 2.0 ports. 1 serial port. 1 parallel port. 1 RJ-45 LAN jack. 1 PS/2 Mouse & Keyboard port. 1 vertical audio port including 1 line-in connector, 1 speaker out connector, and 1 MIC-in connector. -
Page 6: Layout
KT600-AA AYOUT JKBV1 JCFAN1 JKBMS1 JCOM1 JCLK1 ATX1 CPU1 JUSBV2 JUSB1 JUSB4 (optional) JRJ45USB1 JSPDIF_OUT1 (optional) JCDIN1 JAUDIO JAUDIO2 AGP1 JSPDIF_IN1 (optional) Codec PCI1 JSATA2 JUSB3 JUSB2 PCI2 JSATA1 JCI2 Super JUSBV1 JCI1 (optional) PCI3 JCMOS1 FDD1 JSFAN1 BIOS PCI4... -
Page 7: Components
KT600-AA OMPONENTS CPU1 KT600 Socket 462 VT8237 VT8237R K L M N ATX1: ATX power source connector. FDD1: Floppy disk connector. JKBV1: PS/2 keyboard and mouse JUSBV1: Power source header for power source header. JUSB2/JUSB3. Rear side (back panel) I/O connectors. O. -
Page 8: Chapter 2: Hardware Installation
KT600-AA CHAPTER 2: HARDWARE INSTALLATION (CPU) ENTRAL ROCESSING NSTALLATION Step 1: Pull the lever sideways away from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white dot/cut edge. The white dot/cut edge should point wards the lever pivot. -
Page 9: Memory Module Installation
KT600-AA EMORY ODULE NSTALLATION Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. Insert the DIMM vertically and firmly into the slot until the retaining... -
Page 10: Connectors And Slots
KT600-AA ONNECTORS AND LOTS The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~5, Bus Master, and Ultra DMA 33/ 66/100/133 functionality. -
Page 11: Chapter 3: Headers & Jumpers Setup
KT600-AA CHAPTER 3: HEADERS & JUMPERS SETUP OW TO ETUP UMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened... - Page 12 KT600-AA JSPDIF_OUT1 (optional): Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF header. Assignment SPDIF Out Ground JSPDIF_IN1 (optional): Digital Audio-in Connector This connector allows user to connect the PCI bracket SPDIF header. Assignment SPDIF In...
- Page 13 KT600-AA JUSB2/3: Front USB Headers This motherboard provides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. Assignment Assignment...
- Page 14 KT600-AA JPANEL1: Front Panel Header This 24-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button, speaker and IrDA Connection. It allows user to connect the PC case’s front panel switch functions. PWR_LED On/Off HLED Assignment Function Assignment Function...
- Page 15 KT600-AA JUSBV1/2: Power Source Headers for USB ports JUSBV1/2 Assignment Description JUSBV1: +5V for JUSB2/3. JUSBV2: +5V for JUSB1/4 and Pin 1-2 close JRJ45USB1. JUSBV1: JUSB2/3 are powered by standby voltage of +5V +5V standby JUSBV2: JUSB1/4 and JRJ45USB1 Voltage...
-
Page 16: Chapter 4: Useful Help
KT600-AA CHAPTER 4: USEFUL HELP BIOS B WARD Beep Sound Meaning One long beep followed by two short Video card not found or video card beeps memory bad High-low siren sound CPU overheated System will shut down automatically One Short beep when system boot-up... - Page 17 KT600-AA If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.
-
Page 18: Troubleshooting
KT600-AA ROUBLESHOOTING Probable Solution No power to the system at all Make sure power cable is Power light don’t illuminate, fan securely plugged in. inside power supply does not Replace cable. turn on. Contact technical support. Indicator light on keyboard does not turn on. -
Page 19: Chapter 5: Warpspeeder
KT600-AA WARPSPEEDER™ CHAPTER 5: NTRODUCTION [WarpSpeeder™], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. -
Page 20: Installation
KT600-AA NSTALLATION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. -
Page 21: Warpspeeder™] Includes 1 Tray Icon And 5 Panels
KT600-AA ™] PEEDER INCLUDES TRAY ICON AND PANELS Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar. This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can... - Page 22 KT600-AA If you click the tray icon, [WarpSpeeder™] utility will be invoked. Please refer to the following figure; the utility’s first window you will see is Main Panel. Main Panel contains features as follows: a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information.
- Page 23 KT600-AA Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is “No”. If you want to get the best performance of overclocking, we recommend you click the option “Yes”.
- Page 24 KT600-AA Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. Overclock Panel contains the these features: a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment.
- Page 25 KT600-AA “Auto-overclock button”: User can click this button and [WarpSpeeder™] will set the best and stable performance and frequency automatically. [WarpSpeeder™] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder™] utility will restore to the hardware default...
- Page 26 KT600-AA Click the “about” button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard’s BIOS model and the Version number of...
- Page 27 KT600-AA Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder™] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’...
Need help?
Do you have a question about the KT600-AA and is the answer not in the manual?
Questions and answers