Advanced Chipset Features - ECS KN1 Extreme Manual

Summary Screen Show (Enabled)
This item determines whether the summary system information will be showed during
boot-up.

3.3-3 Advanced Chipset Features

These items define critical timing parameters of the mainboard. You
should leave the items on this page at their default values unless you are
very familiar with the technical specifications of your system hardware.
If you change the values incorrectly, this may cause fatal errors or
instability into your system.
Phoenix-AwardBIOS CMOS Setup Utility

Advanced Chipset Features

CPU Frequency [200.0]
HT Frequency [4X]
HT Width [ 16 16]
DRAM Configuration [Press Enter]
CPU Spread Sprectrum [Center Spread]
SATA Spread Sprectrum [Disabled]
PCIE Spread Sprectrum [Disabled]
CPU Voltage Control [Normal]
DIMM Voltage Control [2.63V]
System BIOS Cacheable [Disabled]
: Move Enter: Select +/-/PU/PD:Value
F5:Previous Values F6:Performance Defaults
CPU Frequency (200.0)
This item enables users to manually over-clock the CPU frequency, ranging from
200.0 to 209.5.
HT Frequency (4x)
This item enables users to manually set up the HyperTransport frequency, ranging
from Auto, 1x, to 5x.
HT Width ( 16
This item enables users to manually set up the HyperTransport width, width ranging
from 8 down 8 up to 16 down 16 up.
Scroll to this item and press <Enter> to view the following screen:
Item Help
Menu Level
F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
16)
DRAM Configuration (Press Enter)
Phoenix-AwardBIOS CMOS Setup Utility
DRAM Configuration
Timing Mode [Auto]
x Memlock index value (Mhz) 200Mhz
x CAS# latency (Tcl) 2.5
x Min RAS# active time (Tras) 8 T
RAS# to CAS# delay(Trcd) 4 T
x
x Row precharge Time (Trp) 4 T
: Move Enter: Select +/-/PU/PD:Value
F5:Previous Values F6:Performance Defaults
Item Help
Menu Level
Places an artificial memory
clock limit on the system.
Memory is prevented from
running faster than this
frequency
F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
3-7