Table of Contents
Advertisement
42
PNP/PCI Configurations
These options configure how PnP (Plug and Play) and PCI expansion cards operate in your
system. Both the ISA and PCI buses on the motherboard use system IRQs (Interrupt
ReQuests) and DMAs (Direct Memory Access). You must set up the IRQ and DMA assign-
ments correctly through the PnP/PCI Configurations Setup utility for the motherboard to
work properly. Selecting PnP/PCI Configurations on the main program screen displays this
menu:
&'()
Reset Configuration Data (Disabled)
If you enable this item and restart the system, any Plug and Play configuration data stored
in the BIOS Setup is cleared from memory.
Resources Controlled By (Auto(ESCD))
You should leave this item at the default Auto(ESCD). Under this setting, the system
dynamically allocates resources to Plug and Play devices as they are required.
If you cannot get a legacy ISA (Industry Standard Architecture) expansion card to work
properly, you might be able to solve the problem by changing this item to Manual, and
then opening up the IRQ Resources submenu.
Phoenix-AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Resources Controlled by
x
IRQ Resources
PCI/VGA Palette Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin3 Assignment
INT Pin4 Assignment
INT Pin5 Assignment
INT Pin6 Assignment
INT Pin7 Assignment
INT Pin8 Assignment
: Move
Enter: Select
F5:Previous Values
F6:Fail-Safe Defaults
[Disabled]
[Auto (ESCD)]
Press Enter
[Disabled]
Default is Disabled. Select
[Auto]
Enabled to reset Extended
[Auto]
System Configuration Data
[Auto]
ESCD) when you exit Setup
[Auto]
if you have installed a new
[Auto]
add-on and the system
[Auto]
reconfiguration has caused
[Auto]
such a serious conflict that
[Auto}
the OS cannot boot
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
Using BIOS
Item Help
%
Menu Level
Advertisement
Table of Contents
