Selecting The Remote Control Id (Remote Id); Changing The Fm/Am Tuning Frequency Setting (Tu); Switching The Video Signal Type (Tv Format); Selecting The Hdmi 4K Signal Format (4K Mode) - Yamaha RX-V381 Owner's Manual

Selecting the remote control ID (REMOTE ID)

CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT
VOL.
ECO
REMOTE ID••ID1
Change the unit's remote control ID so that it matches the remote control's ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
n
Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (e), hold down
SCENE (BD/DVD) for more than 3 seconds.
To select ID2, while holding down the cursor key (e), hold down
SCENE (TV) for more than 3 seconds.

Changing the FM/AM tuning frequency setting (TU)

(Asia, Taiwan and General models only)
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps
FM100/AM10
and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9
and AM by 9-kHz steps.
ADAPTIVE DRC VIRTUAL
ADAPTIVE DRC VIRTUAL

Switching the video signal type (TV FORMAT)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea, Taiwan and General models: NTSC
Other models: PAL

Selecting the HDMI 4K signal format (4K MODE)

4K MODE•MODE 2
Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz)
compatible TV and playback device are connected to the unit.
Settings
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
MODE 1 Depending on the connected device or HDMI cables, video may not be
displayed correctly. In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
Note
When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps.
66
En
SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL