Completion; Installing The Air Duct - Fujitsu PRIMERGY TX100 S1 Options Manual

8

Completion

V
CAUTION!
Follow the safety instructions in the chapter
page 11.
8.1

Installing the air duct

I
When installing the air duct, make sure that you do not damage the heat
sink on the system board.
Figure 18: Installing the air duct
Ê Place the air duct on the heat sink.
Ê Push the air duct towards the front of the server until it clicks into the locking
mechanism.
TX100 S1
Options Guide
"Safety instructions" on
37