Fujitsu PRIMERGY TX100 S1 Options Manual page 33

Expansion cards and parallel interface
Figure 15: Installing an expansion card
Ê Carefully press the new expansion card into the relevant slot on the system
board until it clicks into place.
Ê Screw the slot cover for the expansion card into place (see circle).
Ê If necessary, connect the cable to the expansion card and the other
components.
Ê Close the server (see section
the power outlet, and switch it on.
TX100 S1
Installing an expansion card
"Closing the server" on page
Options Guide
38), connect it to
33