Procedure - Fujitsu PRIMERGY TX100 S1 Options Manual

2

Procedure

V
CAUTION!
The actions described in this manual should only be carried out by
technical specialists.
Equipment repairs should only be performed by service staff. Please
note that unauthorized interference with the system will void the
warranty and exempt the manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
Ê First of all, carefully read the safety instructions in chapter
instructions" on page 11
Ê Make sure that all necessary manuals (see section
overview" on page
importantly, you will need the operating manual for the server and the
technical manual for the system board.
Ê Shut the server down correctly, switch it off, disconnect the power plugs and
open the server as described in chapter
Ê Carry out the expansion or upgrade of your server as described in the
pertinent chapter.
Ê Close the server, connect it to the power outlet, and switch it on as described
in chapter "Completion" on page
Ê Start the operating system and make the appropriate configuration if
necessary (see operating manual).
TX100 S1
and following.
6) are available; print the PDF files if required. Most
37.
Options Guide
"Documentation
"Preparation" on page
"Safety
17.
9