Caratteristiche Tecniche - Sagitter MOVING WASH 575 User Manual

SAFETY INSTRUCTIONS
CAUTION: be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching the wires.
This device has left our premises in absolutely perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this user manual.
IMPORTANT: Damages caused by the disregard of this user manual are not subject to
warranty.
If the device has been exposed to drastic temperature fluctuation (e.g. after
transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached room
temperature.
This device falls under protection-class I. The power plug must only be plugged into a
protection class I outlet.
Never let the power-cord come into contact with other cables! Handle the power-cord
and all connections with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the
device and the power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power-cord by the plug. Never pull out the plug by tugging the power
cord.
During the initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective.
CAUTION: during the operation, the housing becomes very hot.
DANGER OF BURNING: never install the device on a highly flammable surfaces (e.g.
fair carpet).
HEALTH HAZARD: Never look directly into the light source, as sensitive persons may
suffer an epileptic shock (especially meant for epileptics)!
Do not switch the device on and off in short intervals as this would reduce the lamp's
life. Please consider that damages caused by manual modifications to the device are not
subject to warranty.
Keep away children and amateurs!
34
- Errore tilt
Questo messaggio appare dopo il reset se il tilt non è nella corretta posizione oppure
non funzionano correttamente il sensore magnetico o il motore passo passo
- Errore frequenza
Questo messaggio apparirà se la frequenza di rete non è a 50 o 60 Hz

CARATTERISTICHE TECNICHE

Alimentazione
Potenza assorbita
Canali DMX
Connessione DMX
Lunghezza
Larghezza
Altezza
Peso netto
Massima temperatura ambiente
Massima temperatura dell'apparecchio
Distanza minima da superfici infiammabili
Distanza minima da superfici illuminate
Fusibile
Nota ogni informazione è soggetta a cambiamenti senza preavviso.
Lampada
HSR / MSR 575
Sistema ottico .
Specchi con parabole ad alta efficienza
Lente Fresnel motorizzata
Lenti anti riflessione
Colori
CMY (Ciano Magenta Giallo) miscelazione dei colori
4 filtri dicroici intercambiabili più il bianco, filtri temperatura 3200K, 6000K, UV
ruota colori con velocità di rotazione variabile
230V / 50Hz
800W
14 / 16 (16 bit)
XLR 3 poli
475 mm
465 mm
515 mm
33 kg
40 °C
90 °C
1 m
1 m
F10A 250V
27