Table of Contents
Advertisement
INDICE:
ATTENZIONE........................................................................... p. 3
INTRODUZIONE....................................................................... p. 3
CARATTERISTICHE.................................................................. p. 3
NORME DI SICUREZZA............................................................. p. 5
CONDIZIONI OPERATIVE........................................................... p. 6
INSTALLAZIONE....................................................................... p. 7
Installazione / sostituzione lampada........................................ p. 7
Regolazione della lampada................................................... p. 8
Montaggio.......................................................................... p. 9
Connessione alla rete di alimentazione.................................... p. 12
FUNZIONI DEL CONTROLLO CANALI - PROTOCOLLO 16 BIT........ p. 12
FUNZIONI DEL CONTROLLO CANALI - PROTOCOLLO 8 BIT.......... p. 15
INDIRIZZAMENTO..................................................................... p. 15
CONTROLLI............................................................................. p. 16
PANNELLO DI CONTROLLO...................................................... p. 17
MESSAGGI DI ERRORE............................................................ p. 25
CARATTERISTICHE TECNICHE.................................................. p. 27
PULIZIA E MANUTENZIONE....................................................... p. 30
2
CLEANING AND MAINTENANCE
CAUTION: Disconnect from mains before starting maintenance operation!
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not build up on or within the fixture. Otherwise, the fixture's light-output will
be significantly reduced. Regular cleaning will not only ensure the maximum light-output,
but will also allow the fixture to function reliably throughout its life.
Please use a moist, lint-free cloth. Never use alcohol or solvents!
CAUTION: The lens has to be replaced when it is obviously damaged, so that its function
is impaired, e. g. due to cracks or deep scratches!
The Fresnel lens will require weekly cleaning as smoke-fluid tends to building up
residues, reducing the light-output very quickly. The cooling-fans should be cleaned
monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or
an air-jet. The dichroic colour-filters should be cleaned monthly.
There are no serviceable parts inside the device except for the lamp and the fuse.
Maintenance and service operations are only to be carried out by authorized dealers.
REPLACING THE FUSE
Only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
PROCEDURE:
1.
Unscrew the fuse holder on the rear panel with a fitting screw driver from the
housing
2.
Remove the old fuse from the fuse holder.
3.
Install the new fuse in the fuse holder.
4.
Replace the fuse holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by
authorized dealers.
Should you have further questions, please contact your dealer.
59
Advertisement
Table of Contents
