Table of Contents
Advertisement
3.
Choose the "Device Manager" tab, and then click the "+" in front of "SCSI & RAID
controllers." "Win9x-ME Promise FastTrak TX2000 (tm) Series Controller" should
appear.
DOS/Windows 3.1x
For first-time installation, follow the standard procedure of installing DOS on to your hard disk
(partition all hard drives with FDISK and format before performing the following procedure):
1.
Insert "Disk 1" of your DOS installation diskettes into drive A:.
2.
Type "A:SETUP" at the "A:\" prompt.
3.
Continue with normal DOS installation procedure, and refer to your DOS manual for
additional details.
NOTE: The FastTrak TX2000 BIOS supports both DOS and Windows 3.1x without software
drivers.
FastTrak TX2000™ Series User Manual
41
Advertisement
Table of Contents
