Table of Contents
Advertisement
Windows ME
Installing Drivers During Windows ME Installation
The following details the installation of the FastTrak TX2000 drivers while installing Windows
ME (with the FastTrak TX2000 controller card already in place). If you're installing the FastTrak
TX2000 drivers on a system with ME already installed, see "Installing Drivers with Existing
Windows ME System."
1.
Install Windows ME fully.
2.
After installation, go the "Start" menu and choose "Settings."
3.
From the "Settings" menu, choose "Control Panel."
4.
In the "Control Panel" window, double-click on the "System" icon.
5.
In the "System" window, choose the "Device Manager" tab.
6.
In the hierarchical display under "Other Devices" is a listing for "PCI RAID Controller."
Choose it and then press the "Properties" button.
7.
Choose the "Driver" tab in the "Properties" window, choose "Update Driver," and then
press "Next."
8.
Choose "Search for a better driver than the one your device is using now
(recommended)," then press "Next."
9.
Choose "Specify Location," and then type "A:\WIN9x-ME" in the text box.
10. Insert the "FastTrak TX2000 Driver" diskette into the A: drive.
11. Press the "Next" button. A message informing you that Windows Millennium has
found "Win9x-ME Promise FastTrak TX2000 (tm) Series Controller" should appear.
12. Press "Next," then "Finish," then "Yes" when asked if you want to restart your
computer. Be sure to remove the diskette from drive A:.
FastTrak TX2000™ Series User Manual
36
Advertisement
Table of Contents
