Pairing A New Stride Sensor With Training Computer - Polar Electro RCX5 User Manual
Hide thumbs
Also See for RCX5:
- User manual (59 pages) ,
- Getting started manual (29 pages) ,
- Manual (28 pages)
Table of Contents
Advertisement
2.
Searching for new GPS sensor
signal.
3.
Once the new GPS sensor is identified,
4.
If the search is not successful,
Try again? YES / NO
5.
Select
YES
to start the search again.
6.
Select
to cancel the searching.
NO
7.
To return to time mode, press and hold the BACK button.
Pairing a New Stride Sensor With Training Computer
Make sure the stride sensor has been correctly attached to your shoe.
1.
Go to
>
Menu
Settings
2.
Searching for new stride sensor
sensor signal.
3.
Once the new stride sensor is identified,
4.
If the search is not successful,
,
further.
Try again? YES / NO
5.
Select
to start the search again.
YES
6.
Select
NO
to cancel the searching.
7.
To return to time mode, press and hold the BACK button.
For more information on setting up the stride sensor refer to the user manual of the stride sensor or to the video
tutorial at http://www.polar.com/en/support/video_tutorials .
is displayed. The training computer starts searching for the GPS sensor
GPS sensor found
GPS sensor not found
is displayed.
>
>
Sport profiles
Running
is displayed. The training computer starts searching for the stride
Stride sensor found
Stride sensor not found
is displayed.
is displayed. Pairing is complete.
or
Other GPS sensors interfering. Move further.
>
>
Stride sensor
Search new
is displayed. Pairing is complete.
or
Other stride sensors interfering. Move
Using a New Accessory
ENGLISH
,
and press OK.
43
Advertisement
Table of Contents
