Vcr Adjustment - Samsung VP-D30 Service Manual

1. VCR Adjustment

1-1 VCR Adjustment Preparation
1) How to get into the VCR adjust mode
STEP 1
ΠConnect the power source.
´ Set the power switch to "TAPE" position.
STEP 2
ΠPress and hold the "STOP" and "PB ZOOM"
buttons on the video camera at the same time
for more than 5 seconds.
´ When monitor OSD appears as shown Fig. 1-2, the
adjustment mode has been activated successfully.
ˇ Move the "MENU Selector" to highlight VCR ADJ
and push the "MENU Selector". (See Fig. 1-3)
¨ When changing the adjustment item, please press
the "EASY" and "DISPLAY" buttons on the video
camera.
ˆ You can change the adjustment value to move the
"MENU Selector" Up or Down.
Ø After setting adjustment value, please push the
"MENU Selector" to confirm Data.
STEP 3
If you want to finish the adjustment mode, you have
to do Power Reset.
The Power Reset means that you pull out the power
source and pull in it again.
Samsung Electronics
SP
- : - - : - - : -
VCRADJ EPR EVR
430 FF FF
DISPLAY Button
PB ZOOM Button
EASY Button
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
Indicates current adjustment item
Indicates the adjusted values
Indicates preset values
Fig. 1-3
STOP Button
MENU Selector
Fig. 1-1
ADJ ITEM
Fig. 1-2
1-1