Vcr Adjustment - Samsung VP-D353 Service Manual

3. Alignment and Adjustment

3-1 VCR Adjustment

3-1-1 Adjustment Preparation
1) Before you start
ΠUse the buttons on the CAMCORDER when adjusting VCR.
´ When changing the adjustment item, please press the "EASY-Q" and "DISPLAY" buttons on the
CAMCORDER.
ˇ The adjustment value can be changed by moving the "MENU Selector" Left or Right.
¨ Press the "MENU Selector" to store each adjustment into EEPROM.
ˆ The OSD shows "OK" after finishing each adjustment step.
Ø In order to exit the adjustment mode, disconnect the power source.
2) Function of each buttons on the Set Key
Buttons
MENU Selector push (Confirm)
MENU Selector Right (Data Down)
MENU Selector Left (Data Up)
EASY-Q (Mode Up)
DISPLAY (Mode Down)
3) How to get into the VCR adjust mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "PLAYER" position and Mode Switch to "TAPE" position.
EASY Q Button
Samsung Electronics
<Table 3-1>
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
DISPLAY Button
STOP Button
PB ZOOM
Mode switch
Description
Start/Stop Button
Fig. 3-1
MENU Button
MENU Selector
DV
USB
AV
MIC
Power switch
3-1