Vcr Adjustment - Samsung SCD180 Service Manual

4. Alignment and Adjustment

4-1. VCR Adjustment

4-1-1. VCR Adjustment Preparation
1. How to get into the VCR adjust mode.
STEP 1
1. Connect the power source.
2. Set the mode switch of the video camera to
"VCR" position.
3. Push the "TAPE EJECT" switch so that Door
Housing is opened.
VCR ADJ
EPR:FF EVR:FF
Samsung Electronics
SP
–:– –:– –:– –
01
STEP 2
1. Press and hold the "F.ADV" button on the
remote control and "DISPLAY" button on the
video camera at the same time for more than 5
seconds.
2. When monitor OSD appears as shown below,
VCR adjustment mode has been activated suc-
cessfully.
3. When changing the adjustment item, please
press the "PHOTO/Self Timer" button on the
Remote controller.
4. You can press "T/W" button on the remote con-
troller to change adjustment value.
5. After setting adjustment value, please press
"START/STOP" button on the remote controller
to confirm DATA.
Indicates current adjustment item.
Indicates the adjusted values
Indicates preset values
4-1