Samsung VP-D30 Service Manual page 68

Alignment and Adjustments
4-4 Mechanical Check and Adjustment
4-4(a) Tension Regulator Adjustment
1) Disassembly
ΠFor the removal of the Housing Ass'y.
2) Adjustment
ΠSet to PLAY mode (without cassette tape).
´ Check that the distance between external surface of Holder Loading and center of Arm Tension is 0~1mm.
(Fig. 4-5)
ˇ If necessary, proceed to step 4.
¨ If the Arm Tension is located inside the position specified, adjust the Band Adjust Tension toward arrow A.
(If it is located outside, adjust toward arrow B.)
Note : Check if the Arm Tension can be moved toward arrow C in PB mode.
3) Reassembly
ΠFor the removal of the Housing Ass'y.
ARM TENSION
CAP ADJUSTMENT
4-4
±
1 0.3
Fig. 4-5
Samsung Electronics