Alignment And Adjustments; Vcr Adjustment - Samsung VP-D361i Service Manual

3. Alignment and Adjustment

3-1 VCR Adjustment

3-1-1 Adjustment Preparation
1) Before you start
ΠUse the buttons on the CAMCORDER when adjusting VCR.
´ When changing the adjustment item, please press the "EASY-Q" or "DISPLAY" buttons on the
CAMCORDER.
ˇ The adjustment value can be changed by moving the "MENU Selector" Up or Down.
¨ Press the "MENU Selector" to store each adjustment into EEPROM.
ˆ The OSD shows "OK" after finishing each adjustment step.
Ø In order to exit the adjustment mode, disconnect the power source.
2) Function of each buttons on the Set Key
Buttons
PHOTO Button push (Confirm)
ZOOM Lever Right (Data Up)
ZOOM Lever Left (Data Down)
EASY-Q (Mode Up)
DISPLAY (Mode Down)
3) How to get into the VCR adjust mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "PLAY" position and Mode Switch to "TAPE" position.
DISPLAY
MACRO/PB ZOOM
Speaker
Mode Switch
Samsung Electronics
<Table 3-1>
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
Fig. 3-1
Description
Viewfinder
M E N U
Color Nite
Light
3-1