Vcr Adjustment - Samsung VP-D20 Service Manual

1. VCR Adjustment

1-1 VCR Adjustment Preparation
1) How to get into the VCR adjust mode
STEP 1
ΠConnect the power source.
´ Set the power switch to "TAPE" position.
STEP 2
ΠPress and hold the "STOP" and "EASY" buttons on
the video camera at the same time for more than 5
seconds.
´ When monitor OSD appears as shown Fig. 1-2, the
adjustment mode has been activated successfully.
ˇ Move the "MENU Dial" to highlight VCR ADJ
and push the "ENTER". (See Fig. 1-3)
¨ When changing the adjustment item, please press
the "EASY" and "DISPLAY" buttons on the video
camera.
ˆ You can change the adjustment value to move the
"MENU Dial" Up or Down.
Ø After setting adjustment value, please push the
"ENTER" to confirm Data.
STEP 3
If you want to finish the adjustment mode, you have
to do Power Reset.
The Power Reset means that you pull out the power
source and pull in it again.
Samsung Electronics
SP
- : - - : - - : -
VCRADJ EPR EVR
430 FF FF
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
Indicates current adjustment item
Indicates the adjusted values
Indicates preset values
Fig. 1-3
EASY Button
STOP Button
DISPLAY Button
MENU Dial
ENTER Button
Fig. 1-1
ADJ ITEM
Fig. 1-2
1-1