Samsung VP-D30 Service Manual page 60

Alignment and Adjustments
4) Function of each buttons on the SET Key
Buttons
MENU Selector push (Confirm)
MENU Selector down (Data Down)
MENU Selector up (Data Up)
EASY (Mode Up)
DISPLAY (Mode Down)
5) How to set up the camera adjustment mode
STEP 1
ΠConnect the power source (battery/DC cable).
´ Set the power switch to "CAM" position.
ˇ The OSD appears.
STEP 2
ΠPress and hold the "STOP" and "PB ZOOM"
buttons on the video camera at the same time
for more than 5 seconds.
´ When monitor OSD appears as shown Fig. 2-2, the
adjustment mode has been activated successfully.
ˇ Move the "MENU Selector" to highlight CAM
ADJ and push the "MENU Selector".
¨ When changing the adjustment item, please press
the "EASY" button on the Camera.
ˆ You can change the adjustment value to move the
"MENU Selector" Up or Down.
Ø After setting adjustment value, please push the
"MENU Selector" to confirm Data.
STEP 3
Monitor OSD shows "
Then camera adjustment mode has been activated
successfully.
2-2
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
CAMERA EPR EVR
".
OCD FF FF
<Table 2-1>
Description
DISPLAY Button
PB ZOOM Button
EASY Button
VCR ADJ
CAM ADJ
CODEC ADJ
PRML ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
STOP Button
MENU Selector
Fig. 2-1
ADJ ITEM
Fig. 2-2
Samsung Electronics