How To Receive Audio/Video From Your Computer - RF-Link WAVECOM Sr Owner's Manual

How to receive audio/video from your computer

TM
WAVECOM
the home or office using a TV/Video Card (purchase at your local computer store) .
This feature allows you to transmit live TV broadcasts from your large TV screen
to a desktop or laptop computer without running wires between the two.
Step 1. First, insert the TV/Video Card into one of your computer's open slots,
preferably one which is close to the VGA controller. See TV/Video Card
owner's manual for connection between the TV/Video Card and the VGA
controller.
Step 2. Connect the single male connector on the Audio/Video Break-out Cable
(comes with TV/Video Card) to the Audio/Video Input Port on the back of
the TV/Video Card. The six female RCA jacks on the other end of the
Break-out Cable allow you to connect up to two different video devices.
Select red, yellow, and blue RCA female plugs for connection to the
WAVECOM
Step 3. Make sure the WAVECOM
Connect yellow video plug of the audio/video (A/V) cables to the red jack
on the Break-out cable. Afterward, connect the red audio plug to the blue
jack, and then the white audio plug to the yellow jack. Connect the other
ends of the A/V cable to the back side of the WAVECOM
Sr. can be used to receive TV broadcasts on a computer monitor in
TM
Sr. receiver.
TM
Sr. ON/OFF switch is in the OFF position.
TM
WAVECOM Sr. owner's manual 21
TM
Sr. receiver,