Registering Data To The Hard Drive (Hdd) - MicroBoards Technology CopyWriter Pro-452RM User Manual

COPYWRITER PRO SERIES DUPLICATOR

Registering Data to the Hard Drive (HDD)

1. At the COPY START? (Disc to Disc) menu, press the NO key until the display
shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT?
(Disc to Disc)
2. Place the Master CD into the Reader drive.
3. Press the Yes key
4. The display will show:
>READER?
5. Press the No key
6. The display will now show:
>HDD1?
7. If you wish to copy the data to the 1
8. If you wish to select another partition, press the NO key.
>HDD2?
9. By continuing to press the NO key, you will scroll through the different HDD
partitions. Once you are at the partition you wish to use, press the YES key.
10. The display will now show the progress of the data being transferred to the hard
drive:
REGIST
CD-DA
Once the Master disc has been copied to the HDD, the Reader drive will eject the disc.
Proceed to COPY HDD TO CD section (page 11).
(DISC TO DISC)
(DISC TO HDD)
(DISC to HDD)
15:26
15%
MICROBOARDS TECHNOLOGY, LLC
st
partition, press the Yes key.
9