The Lcd Control Panel; Hard Drive Bay Status Led Reference - MicroBoards Technology CopyWriter Series User Manual

Microboards Technology, LLC

The LCD Control Panel

The LCD Control Panel shown above has a two-line, 20 character LCD display to provide user
feedback. Eight push buttons control the operation of the Microboards CopyWriter Hard Drive and
CopyWriter Hard Drive Turbo Series duplicators. The functions for these buttons are shown in
Table 1-1.
Control Name
▲
Up
▼
Down
ENT or
ENT
OK
ESC
ESC
Smart
F1
Copy
Raw
F2
Copy
Device
F3
Scan
F4
Shutdown

Hard Drive Bay Status LED Reference

Every Hard Drive bay has a corresponding Status LED next to it with Bay number labeled on top.
The color of the LED indicates the statue of each bay, as shown in Table 1-2.
LED Color
Green
Orange
6
Function
Scroll up through the menu or list.
Scroll down through the menu or list.
Execute the function. Also called OK in the Menus.
Go back to the previous function.
Quick key to make a copy in Smart mode. Pressing this key begins the copying
process.
Quick key to make a copy in Raw mode. Pressing this key begins the copying
process.
Quick key to start a scan of any installed hard drives.
Quick key to begin the Shutdown process. This process should always be
followed when turning off the Hard Drive Duplicator.
Table 1-1: Front Panel Controls
Hard Drive bay has power.
Hard Drive in bay has Read/Write activity.
Table 1-2: Hard Drive Bay Status by LED Color
DESCRIPTION