Table of Contents
Advertisement
DSR DVD Premium Pro Rack Mount Series
Registering Data to the Hard Drive (HDD)
When registering data to a partition on the internal hard drive, you do have the option
of recording to the blank media as well. In the SETUP menu, go to "Copy DISC to
HD/DISC" and change the setting from OFF to ON. This will allow the data from
the master disc to be copied to the internal hard drive, as well as any blank discs you
have in the recorders. See page 19 for a description of the SETUP menu.
1. At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT?
(DISC to DISC)
2. Place the Master disc into the Reader drive.
3. Press the Yes key
4. The display will show:
>READER?
5. Press the No key
6. The display will now show:
>HDD1?
7. If you wish to copy the data to the 1
8. If you wish to select another partition, press the NO key.
>HDD2?
9. By continuing to press the NO key, you will scroll through the different HDD
partitions. Once you are at the partition you wish to use, press the YES key.
10. The display will now show the progress of the data being transferred to the hard
drive:
REGIST
DVD
11. Once the Master disc has been copied to the HDD, the Reader drive will eject the
disc. When you go back into the MASTER SELECT? Menu, and select a
partition with data stored on it, the display will show the type of data (ROM or
Video) and the capacity of that data. Proceed to COPY HDD TO DVD section.
(DISC TO DISC)
(DISC TO HDD)
st
(DISC to HDD)
4.0GB
15%
9
MICROBOARDS TECHNOLOGY, LLC
partition, press the Yes key.
Advertisement
Table of Contents
