Table of Contents
Advertisement
COPYWRITER PRO SERIES DUPLICATOR
Specifications:
CD Recorder Drive:
Power Source:
Weight:
Dimensions:
Power supply:
Environment:
Supported Formats:
CD-DA, Mixed Mode, ISO9660, Hybrid, CD-ROM Mode1/Mode2, CD-I, CD-ROM XA
Form1/form2, HFS, UFS, CD-EXTRA (CD-PLUS), CD+G (Karaoke)
Firmware Updates
Occasionally it may be necessary to load updated firmware on to the CopyWriter Pro
duplicator. You will be sent a disc containing the firmware program. Please follow these
steps to load the disc.
• Hold down the YES button and turn on power to the tower.
• The display will read "Please Wait" and the system will beep once.
• Release the YES button.
• The Reader drive will eject and the display will read "Insert Program Disc".
• Place the firmware disc into the Reader drive and close the tray.
• The display will read "Updating" as the new firmware is being loaded.
• Once the firmware is loaded, the Reader drive will eject the disc.
• Remove the firmware disc from the Reader and close the tray.
• The CopyWriter Pro tower will now reboot and be ready for use with the new
firmware program running.
Contact Information
For technical questions or support issues, please contact Microboards Technology
technical support at PH: 952-556-1639, FAX: 952-556-1628, by email at
support@microboards.com
52x CD-RW speed selectable drive
115V/230V 50-60Hz switchable power supply
48 pounds
7.48" (W) x 17.91" (D) x 17.13" (H)
300W
Temperature: 40°C (104°F) / 5°C (41°F)
Humidity: 20% - 80%
or on the web at http://www.microboards.com.
24
MICROBOARDS TECHNOLOGY, LLC
Advertisement
Table of Contents
