Replacing The Passenger Car Lamps - Lionel The Polar Express Owner's Manual

Remote control ready-to-run set
Hide thumbs Also See for The Polar Express:
Table of Contents

Advertisement

Maintaining and servicing your set

Replacing the passenger car lamps

E
ach passenger car is illuminated by two lamps, Lionel part no. 6205100300. During the course
of normal operations, you may find that the lamps require replacement. Replacement lamps
are available at a Factory Trained Authorized Lionel Service Station or directly from Lionel Customer
Service. See the warranty page for contact information.
Before performing this procedure on the observation car, pull the platform back to disengage the
tabs from the slots in the body. Lift away the platform and remove the three screws from the underside
of the roof above the end platform.
1. Observation car only. Remove the platform, and then remove the three screws from the
underside of the roof.
2. As illustrated in Figure 13, press in the four window insert tabs.
3. Lift away the roof and window insert.
4. Pull the expired lamp straight up and out of the socket and install the replacement.
5. Replace the roof and window insert. Replace the three screws in the roof above the observation car
platform. Refer to Figure 13.
6. Observation car only. Secure the roof with the three screws and replace the platform.
Lionel part no.
6205100300
Figure 13. Passenger car lamp replacement
End platform screws
(Observation car only)
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Polar expressPennsylvania flyer

Table of Contents