Installing Aaa Batteries Into The Remote Control - Lionel The Polar Express Owner's Manual

The LionChief remote control overview

Installing AAA batteries into the Remote Control

F
or safety purposes, you must use a Phillips screwdriver to access the battery compartment. Use
a Phillips screwdriver to remove the screw that secures the battery compartment hatch and
lift the hatch to access battery compartment (as shown in Figure 1). Insert three AAA batteries
orientating the +/- as shown in the bottom of the battery compartment. Replace the battery door
and snap closed.
Use only Alkaline AAA batteries. Use only new batteries. Never mix new and used
Important!
batteries or use different types together.
Figure 1. Opening and closing the battery compartment
REMOVE ALL BATTERIES WHEN THE TRAIN WILL NOT BE USED FOR AN
Important
!
EXTENDED PERIOD OF TIME.
When you are not operating the train, slide the On/Off switch to the Off
Important
!
position to conserve the batteries.
Remove screw and remove
battery compartment hatch
6