Replacing The Passenger Car Lamps - Lionel American Flyer Owner's Manual

Maintaining and servicing your set

Replacing the passenger car lamps

E ach of the passenger cars is illuminated by one lamp, Lionel part no. 600-0057-300.
During the course of normal operation, these lamps may require replacement. Follow
these steps and refer to Figure 5 as you replace the lamps.
1. Turn over the car and locate the lamp socket attached to the frame.
2. Grasp the lamp socket by the two tabs and rotate it clockwise 90 degrees. Lift the socket
straight out of the frame to expose the lamp.
3. Gently rotate the lamp counter-clockwise, then pull it straight up and out of the socket.
4. Install the replacement lamp and reassemble the car, following these steps in reverse order.
Figure 5. Passenger car lamp replacement
Lionel part no 600-0057-300
7
Tabs
Lamp socket