Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Location
Fig.1
Window Kit Installation
Your window slider kit is designed to fit most standard
"vertical" and "horizontal" window applications.
However, it may be necessary for you to improvise or
Fig.2
modify some aspects of the installation procedures for
certain types of windows. Please refer to Fig.2 and
Fig.3 for minimum and maximum window openings.
Window slider kit can be fixed with a small bolt (Fig.4)
Note: If the window opening is less than the
mentioned minimum length of the window slider kit,
cut the piece with holes on its side to fit your window
opening. Do not cut the piece with the exhaust adapter
Fig.3
opening.
Fig.4
The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the
unit.
The unit has casters to aid placement, but it should
only be rolled on smooth and flat surfaces. Use
caution when rolling on carpet. Do not attempt to
roll the unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet.
Allow at least 30cm (approx 12 inches) of space
from the wall for efficient airflow. (Fig.1)
9
Advertisement
Table of Contents
