Datavideo HS-1000 Instruction Manual page 8

To add the TLM-170D monitor, slide the monitor down onto the securing brackets as in the images below.
Once in place tighten the securing screws on both sides to hold the TLM-170D in place.
Now the factory fitted cables can be un-packed from the storage box on the top of the HS-1000 monitor rack.
The cables are numbered so they can be identified and connected correctly to the TLM-170D.
12 SDI Input (PGM from SE-1000) Main in PiP
24 Y (PVW from SE-1000)
25 U / Pb (PVW from SE-1000) Sub in PiP
26 V / Pr (PVW from SE-1000)
23 CV1
35 Audio CV1 (From DN-500 if fitted)
51 HDMI
29 DC Input
8
(From DN-500 if fitted)
(From HDR-200 if fitted)
(Power from PD-1)