12-Picture Mode - Hitachi Ultravision C50-LD7000 Instruction Manual

TV SCAN FUNCTION

12-picture mode

As indicated before (page 20), enter the menu and then
Function menu to select the TV Scan option as shown on right.
Press the cursor button to set the TV Scan option to
mode 12, then quit the menu.
In normal TV mode, press the TV SCAN button to enter
12-picture mode as shown below.
The 12 pictures will display individual program cyclically
every several seconds starting from the number 0 except for those
skipped program No. For example, if the preset channels are less
than 12, the actual program numbers will be displayed. While the
preset channels are more than 12, you can select the program by pressing the program up/down buttons.
In this mode, you can press the
of the selected picture will turn from white to green. Then press the ENTER button to quit the mode, and the
selected picture will fill the entire TV screen.
In this mode, directly entering the program No. by using
the number buttons will quit the mode. The selected picture
will fill the entire TV screen.
In this mode, no signal output is from speaker,
MONITOR OUT and VARIABLE AUDIO OUT terminals.
In this mode, press the TV SCAN or RETURN button
to quit. If you enter the menu by pressing the MENU button,
it will quit the 12-picture mode.
In this mode the A/B, SWAP and POSITION buttons
are invalid.
The Strobe function shown as below:
As indicated before (page 20), enter the menu and then Function menu to select the Freeze option. Press the
cursor buttons to set the Freeze option to the Strobe and then quit the menu.
In normal TV mode, press the FREEZE button to enter 12-picture mode automatically. The 12
will display the current moving picture. 11 continuous frozen pictures will display respectively in the other 11
pictures when the FREEZE button is pressed. This function is not valid for all of input signal formats. When
"! Not Available" appears, it is invalid.
In this mode, press the RETURN or FREEZE button to quit the 12-picture mode.
In this mode, displaying the menu by pressing the MENU button will quit the 12-picture mode.
At this moment, the MONITOR OUT terminal on the TV will output the audio and video signal from the
current moving picture while the VARIABLE AUDIO OUT terminal will output the audio signal from it.
In this mode, A/B, SWAP and POSITION buttons are invalid.
cursor buttons to select one of the pictures, and the program No.
36
th
picture