Table of Contents
Advertisement
GETTING STARTED
Easy preset
It becomes convenient for the customers to program the TV using the remote control unit and on-screen
display of the TV set. Please follow the procedures below to start tuning.
1
Press MENU button to display menu.
Press the
cursor buttons to select Setup option as
shown on right.
2
Press ENTER button to display Setup menu.
Press the
cursor buttons to select Easy Preset
option as shown on right.
3
Press ENTER button to display Easy Preset menu.
Press the
cursor buttons to select Sound System
option, then press the
required sound system.
Now press the
Program option, then press ENTER button to begin the
auto tune procedure. The character Searching will
appear at the bottom of menu, indicating that the TV is
searching and storing all signals available in the area or
CATV. You can interrupt it by pressing the ENTER
button in the process of searching.
The set'll exit menu display mode automatically after
searching is finished.
Note:
1) If you want to arrange the program obtained by Easy Preset, please refer to the Tuning section on page 22.
2) If your equipment (such as VCR, Game Machine) only has RF output, connect it with RF cable into the antenna
input of the TV set and refer to the Tuning section on page 22 for presetting.
3) When you are in video mode (AV1, AV2 etc.) , accessing Easy Preset menu will enable the TV to switch to
RF mode automatically. This is normal.
cursor buttons to select the
cursor buttons to select All
15
On
ENGLISH
Advertisement
Table of Contents
